HERCULES Natural Wind Turbine
Hercules Natural Wind Turbine is the flagship of the ENESSERE range, a wind engineering solution that combines premium materials with advanced design.
The blades are clad with more than 4,000 Paulownia wood strips, individually applied by our master craftsmen onto a carbon fibre structure.
This craftsmanship ensures lightness, strength and a distinctive aesthetic.
The tower is made of stainless steel, ensuring long-lasting durability even in demanding environmental conditions.
ENESSERE develops vertical small wind solutions designed for integration into high-profile architectural and urban environments, where the installation becomes an integral part of the project.
Every ENESSERE installation is designed according to the project context, site conditions and the required level of customisation.
Indicative price: Hercules Natural Wind Turbine starts from €96,000 + VAT.
OTHER MODELS
Pegasus Wind Turbine
Hercules Tech Wind Turbine
| General Information | |
|---|---|
| Axis | Vertical |
| Total Height | 8,85 m |
| Tower Height | 6,00 m |
| Rotor Width | 2,68 m |
| Wing Height | 3,76 m |
| Total Weight | 690 kg |
| Wing Structure Material | Carbon Fiber |
| Wing Covering Material | Paulownia Wood |
| Tower Material | Stainless Steel 316 |
| Spokes Material | Carbon Fiber |
| Max Aerodynamic Power | 4 kW |
| Cut-in Wind Speed | 8 knots (~4,0 m/s) |
| Project Wind Speed | 48 knots (~25,0 m/s) |
| RPM | Max 200 RPM |
| Survival Wind Speed | 76 knots (~39,0 m/s) |
| Annual Energy to 6 m/s | ~5000 kWh |
| Noise Level at 60 m | 38 dBA |
| Type of Generator | Magnetic Three-Phase Permanent, Exterior Rotor |
| Operating temperature | -15°C a 40°C (-5°F a 104°F) |
| Connection Type | Direct Connection |
| Inverter Data | |
| Rated Output Power | 4800 VA |
| Operating Range | from 380 to 780 Vdc |
| AC Nominal Voltage | 400 Vrms (50÷60 Hz) |
| Power Factor on Line | 0,95 |
| Degree of Environmental Protection | IP20 |
| ENESSERE HERCULES NATURAL Wind Turbine | Cod NSRH-01 |
|---|---|
| WING STRUCTURE | carbon fiber SAILS covered with 4,000 strips of Paulownia wood Fiberglass protection SPOKES in exposed carbon fiber |
| ROTOR | Rotor with custom-made 20-pole alternator Mechanical brake housing with Brembo system Housing of turbine status control sensors |
| TOWER | Stainless Steel 316 Electropolishing |
| INVERTER | Cleanverter 15 TL Inverter certified CEI 0-21 Power management software from macro-wind Dimensions 1,7×1,02×0,72 m |
| CONTROL PANEL | Double braking system, mechanical and electromagnetic Programmable Logic Controller (PLC) and Sensors: Spinning sensor Wind sensor Vibration sensor Temperature sensors of the generator, inverter and electrical panel Remote control via app |
| SERVICES | Complete Installation Electrical wiring and commissioning with 3 operators DURATION OF THE INTERVENTION: 02 Working Days for each single wind turbine Remote assistance |
| OPTIONAL | NOT INCLUDED | Base plinth Transport Network connection paperwork |
The wind turbine has obtained the following certifications and complies with the following directives:
- CE marking
- EN 61400-2 “Wind turbines – Part 2: Design requirements for small wind turbines”
- EN 12100-1:2010 “Safety of machinery – General design principles – Risk assessment and risk reduction”
- Community Directive 2014/35/EU on low voltage electrical equipment
- Community Directive 2014/30/EU on electromagnetic compatibility
The electrical panel has the following certifications and complies with the following directives:
- CE marking
- CEI 0-21 “Reference technical rule for the connection of active and passive users to the LV networks of electricity distribution companies”
- EN 61000-2-2 “Electromagnetic compatibility – Part 2: Environment – Section 2: Compatibility levels for low-frequency conducted disturbances and signal transmission on public low voltage supply systems”
- EN 61000-3-11 “Electromagnetic compatibility (EMC) — Part 3: Limits — Section 11: Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage power systems for equipment with rated currents <= 75 A and subject to connection according to IEC 61000-3-11:2000 conditions”
- EN 61000-3-12 “Electromagnetic compatibility (EMC) – Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input currents > 16 A and <= 75 A per phase IEC 61000-3-12:2011 IEC 61000-3-12:2011/IS1:2012”
- EN 61000-6-1 “Electromagnetic compatibility (EMC) – Part 6-1: Generic standards – Immunity standard for residential, commercial and light-industrial environments”
- EN 61000-6-3 “Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emissions for residential, commercial and light-industrial environments”
- EN 62109-1 “Safety of power converters for use in photovoltaic power systems – Part 1: General requirements”
- EN 62109-2 “Safety of power converters for use in photovoltaic power systems – Part 2: Particular requirements for inverters”
- G59-3
PAULOWNIA
Paulownia wood comes from the Paulownia Tomentosa tree, renowned for its ecological characteristics: rapid growth and the ability to produce up to four times more oxygen than many other tree species.
Traditionally used in Japanese cabinetmaking for the creation of fine furniture and musical instruments, Paulownia is valued for its lightness, stability and workability.
These characteristics make it an ideal material for the Hercules blades, contributing both to their distinctive appearance and to their structural performance.
STAINLESS STEEL
The Hercules Wind Turbine tower is made of stainless steel, selected to ensure strength, reliability and long-term durability.
This material is highly resistant to corrosion and virtually immune to rust, even in demanding environments such as coastal areas, where salinity is a critical factor.
The use of stainless steel ensures high performance and long-term safety, even under challenging environmental conditions.
Contact us
Feel free to contact us to get more information about our products.
We will reply as soon as possible.
Explore Enessere
Discover our products Interactively
Experience Augmented Reality on Your Smartphone or Tablet
Choose your preferred model and place our wind turbine wherever you like, seamlessly integrating it into the environment you know best.
Create Your Vision with the ENESSERE Configurator
See how the future could look in your home or at your company, then share your vision with others.
Discover the Design and Proportions with the Scale Model
We have created an accurate 1:21 scale model, crafted using the same materials as the original turbine.
